ShoreLand'r SL82TAL - Manual (Page 12)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003356
REV G 4/28/06 Page 12
Roller Arm
Mount the two rear roller arm assemblies to the pivot weldments by placing them in the channel of the pivot weldments
and attaching with 1/2” x 4-1/2” stainless steel hex bolts and 1/2” stainless steel lock nuts. Repeat process on other side.
Attach roller arm assemblies to the roller arm tube by lining up the holes insert a 1/2” X 4-1/2” stainless
steel hex bolt and 1/2“ stainless steel lock nut. Repeat process on remaining roller arm assemblies.
Roller Arm Assembly