ShoreLand'r SLB12TS User Manual
Page 11
Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
www.shorelandr.com
0004223
Page
11
of
11
8/16/2010
fender to the trailer frame. The axle can then be moved forward or backward to get the proper tongue
weight.
A recommended tongue weight for your trailer is 7-10% of the total load including boat, motor, and
trailer.
Adjustments are now complete. Double check your boat for fit. If desired fit has been achieved, tighten
all fasteners that may have either been left loose or have been loosened to do the adjusting.
Note: All nuts and bolts must be tightened before towing.
The law requires that the white ground wire on both the tongue wire harness and vehicle
harness be properly grounded to respective trailer and vehicle frames.
Re-check all fasteners on the complete trailer to make sure they are all tight and ready for towing. All
fasteners should be periodically checked before towing.
See your ShoreLand’r Owner’s Guide for further technical information regarding your trailer and its
components.