ShoreLand'r SL18LN - Manual (Page 6)

ROLLER ASSEMBLY (R SERIES)
Place the roller arm assembly mounting channel over the
rear cross member and secure with a 1/2” x 4-1/4” carriage
bolt and lock nut. (See Detail H). Repeat on the other roller
arm assembly. The roller arm assembly should be left loose
until the boat is placed on the trailer for adjustment. Once the
correct position is determined, tighten.
SLR18N
Midwest Industries, Inc. Ida Grove, IA 51445 (800)859-3028 www.shorelandr.com M304285
REV A 9/18/03
Page 6