ShoreLand'r SLR22L V.2 - Manual (Page 10)

Roller Assembly
Place the roller arm assembly mounting channel over
the rear cross member and secure with a 1/2” x 4-1/4”
carriage bolt and lock nut. Repeat on the other roller
arm assembly. The roller arm assembly should be left
loose until the boat is placed on the trailer for adjust-
ment. Once the correct position is determined, tighten
Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0003697
Page 10 of 11 Rev A 4/27/2011