ShoreLand'r SLR30BLW V.2 User Manual
Page 3
Advertising
Midwest Industries, Inc.
Ida Grove, IA 51445
800.859.3028
www.shorelandr.com
0003433
Page 3
FINAL ASSEMBLY INSTRUCTIONS
Remove the hardware bag from the frame, remove parts
and sort by size.
R SERIES
The R-series roller rack is installed by placing the roller arm
assembly mounting channel over the rear cross mem-
ber and securing in place with a 1/2” x 4-1/2” hex bolt
and lock nut. (See Diagram A). Note that it should be
left loose until the boat is placed on the trailer. Once
the proper positions is determined, it may be tight-
ened. Repeat on the other roller arm assembly.
The short stabilizer bunk is installed to the adjustable bunk
bracket on the front cross member with a 3/8” x 1” hex bolt
and lock nut. (See Diagram A).
Advertising