ShoreLand'r SLXR40TBLW V.1 User Manual
Page 12
Advertising
Midwest Industries, Inc.
Ida Grove, IA 51445
800.859.3028
www.shorelandr.com
0003452
Page 12
REV A 10/18/06
XR SERIES
The XR-series roller rack is installed by placing the
roller arm assembly mounting channel over the rear
cross member and securing in place with a 1/2” x 4-
1/2” hex bolt and lock nut. (See Diagram A). Note that
it should be left loose until the boat is placed on the
trailer. Once the proper positions is determined, it may
be tightened. Repeat on the other roller arm assem-
bly.
The short stabilizer bunk is installed to the adjustable
bunk bracket on the front cross member with a 3/8” x
1” hex bolt and lock nut. (See Diagram A).
Advertising