ShoreLand'r PWC1000L V.2 - Manual (Page 2)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0002990
Page 2 REV B 02/14/06
Assembly Instructions:
Remove the small parts from the frame by cutting the banding. Re-
move the bolt bag and sort all the nuts and bolts by size.
Tongue:
Take the tongue and slide into the tongue channel. Secure with
a 3/8” X 4” carriage bolt in the front and 3/8” X 3-7/16” X 4-1/8”
square u-bolt, 1” X 4-1/2” mounting strap and 3/8” flange lock nut in
the rear of the assembly. Thread the tongue wire harness through
the tongue and connect to the frame harness. Install grommets.
NOTE: Install the tongue in one of the two adjustment holes in the
tongue channel. Refer to the parts drawing for placement.
Safety Chain:
Insert a 3/8” X 1-1/4” hex bolt with a 3/8” flat washer and safety
chain through the lower hole on the front of the tongue. Secure with
a 3/8” flange lock nut. Repeat this procedure on the opposite side
of the tongue.