EnGenius Technologies EVR100 - Manual (Page 85)

84
10.2. Port Mapping
Port Mapping allows you to redirect a
particular range of ports to a computer on
your LAN network. This helps you host
servers behind the NAT and Firewall.
In the example below, there is a Mail Server
that requires ports 25.
When there is a connection from the Internet
on those ports, it will be redirected to the
Mail Server at IP address 192.168.0.150.
Port Mapping
Enable Port Mapping Tick this box to Enable the Port Mapping feature.
Description Enter a name or description to help you identify this entry.
Local IP The local IP address of the computer the server is hosted on.
Protocol Select to apply the feature to either TCP, UDP or Both types of packet transmissions.
Port range The range of ports that this feature will be applied to.