SMA GSM-UMTS-OUTAN - Manual (Page 22)

Mounting and connecting the antenna SMA Solar Technology AG
22 UMTS-Antenne-IXX103410 Installation Guide
Mounting the bracket and connecting the antenna
1. Mark the drill holes.
2. Drill holes with a diameter of 8mm at the marked position.
3. Insert the screw anchors. Fasten the bracket on the
wall with screws.
4. Loosen the cable gland from the antenna.
5. Using the cable, guide the antenna sideways into
the bracket.
6. Tighten the cable gland of the antenna with a
torque of 20 Nm. By doing so, hold on to the
antenna, in order to avoid twisting the cable.
7. Lay cable to the router. To do so, drill a hole for the cable entry in a suitable position and use
a protective tube or cable duct.
8. Insert the cable into the communication distribution box (see technical description of the
communication distribution box).