SMA BLUETOOTH PIGGY-BACK PLUS - Manual (Page 25)

SMA Solar Technology AG 11 Troubleshooting
Installation Guide BTPB-Ant-IEN111510 25
11 Troubleshooting
Problem Cause Measure
The inverter with Bluetooth
Piggy-Back is not shown by
the communication product. The inverter with Bluetooth
Piggy-Back has not been
commissioned. • Commission the inverter with
Bluetooth Piggy-Back (see
inverter installation guide).
The inverter with Bluetooth
Piggy-Back is not in feed-in
operation. • Wait until the inverter switches
to feed-in operation.
The Bluetooth Piggy-Back has
not been installed correctly on
the interface socket. • Ensure that the Bluetooth
Piggy-Back has been correctly
installed on the interface
socket (see section7.2).
NetID "0" is set on the Bluetooth
Piggy-Back. • Set the NetID of the plant on
the Bluetooth Piggy-Back
(see section 6.2).
NetID "1" is set on the Bluetooth
Piggy-Back. • Set another NetID on the
Bluetooth Piggy-Back.