SMA SPEEDWIRE V.1.1 - Manual (Page 8)

2 Safety SMA Solar Technology AG
8 SPW-WebconPB-IA-en-11 Installation Manual
The Speedwire/Webconnect Piggy-Back must only be operated with supported products
(see Section 2.2).
For safety reasons, it is not permitted to modify the product or install components that are not explicitly
recommended or distributed by SMA Solar Technology AG for this product.
The enclosed documentation is an integral part of this product.
• Read and observe the documentation.
• Keep the documentation in a convenient place for future reference.
Only use the Speedwire/Webconnect Piggy-Back in accordance with the information provided in the
enclosed documentation. Any other use may result in personal injury or property damage.
2.2 Supported Products
SMA inverter
The Speedwire/Webconnect Piggy-Back must only be used in the following inverters with at least the
given firmware version:
Firmware updates on the inverters can only be carried out by SMA Service. If your inverter is in need
of a firmware update, contact the SMA Service Line (see Section 10).
Additional SMA products
• Sunny Explorer from software version 1.05
Sunny Explorer is available free of charge at www.SMA-Solar.com.
• Cluster Controller
2.3 Qualifications of Skilled Persons
The work described in this document must be performed by skilled persons only. Skilled persons must
have the following qualifications:
• Training in the installation and commissioning of electrical devices and plants
• Knowledge of how to deal with the dangers and risks associated with installing and using
electrical devices and plants
• Knowledge of all applicable standards and directives
• Knowledge of how an inverter works and is operated
• Knowledge of and adherence to this document and all safety precautions
Sunny Boy / Sunny Mini Central From firmware version
SB 1300TL-10, SB 1600TL-10, SB 2100TL 4.30
SB 3300-11, SB 3800-11 4.02
SMC 6000A-11 4.33
SMC 7000HV-11 2.21