SMA Sensorbox - Manual (Page 33)

SMA Solar Technology AG Mounting the Device
Installation Guide Sensorbox-IEN100914 33
6.4.4 Mounting the SMA Power Injector with Bluetooth on a Wall
Included Mounting Accessories
1. Remove the bracket from the back of the SMA
Power Injector with Bluetooth as depicted here.
2. The mounting location should be determined
based on the space available and the quality of the wireless connection to the Bluetooth
network
3. Label the drill hole.
4. Drill a 6 mm diameter hole at the designated point and then insert a wall anchor.
5. Fasten the bracket to the wall with a screw.
Position Quantity Designation
A
1 Bracket
*
* Can be found on the back of the SMA Power Injector with Bluetooth on delivery.
B 1 Screw
C 1 Wall anchor