SMA RA100T-NR - Manual (Page 15)

SMA Solar Technology AG Decommissioning
Installation Guide RA100TNR-IEN083510 15
6 Decommissioning
6.1 Dismounting the Sensor
1. Reset configuration of the sensor in the communication device.
2. Detach the sensor cable from the communication device.
3. Remove the sensor from the bracket.
☑ The irradiation and temperature sensor is dismounted.
6.2 Disposal
Dispose of the sensor at the end of its service life in accordance with the disposal regulations for
electronic waste which apply at the installation site at that time. Alternatively, send it back to SMA
Solar Technology with shipping paid by sender, and labeled "ZUR ENTSORGUNG" ("for disposal").