SMA BEAM REPEATER - Manual (Page 16)

Installation SMA Solar Technology AG
16 SBeamRep-BEN091911 User Manual
5 Installation
The Sunny Beam Repeater can be used as a tabletop or wall-mounted device. If you choose to mount
the device on a wall, you can either mount it directly on the wall or on top hat rails.
5.1 Tabletop Device
If you use the Sunny Beam Repeater as a tabletop device, follow the points below:
• Do not cover the Sunny Beam Repeater. This can cause heat to accumulate in the device.
• Lay the USB power supply cable in such a manner that its weight does not cause it to disconnect.
• Lay the cable properly so that there is no risk of persons tripping over it.
Information
Only install the Sunny Beam Repeater once you have determined the appropriate
installation location as described in section 4 "Determining the Installation Location"
(page 9).