3 disassembling the dc connector, Disassembling the dc connector – SMA SB 2500TL-21 Installation User Manual
Page 38
Advertising

Electrical Connection
SMA Solar Technology AG
38
SB25-30TLST-21-IA-en-13
Installation Manual
6.4.3 Disassembling the DC Connector
1. Unscrew the swivel nut.
2. To release the DC connector: Insert a 3.5 mm
screwdriver into the snap slot on the side and lever
it open.
3. Carefully pull the DC connector apart.
4. Release the clamping bracket. To do so, insert a
3.5 mm screwdriver into the clamping bracket and
lever it open.
5. Remove the cable.
Advertising
This manual is related to the following products: