SMA SB 2000HF-30 Installation - Manual (Page 45)

SMA Solar Technology AG Electrical Connection
Installation Manual SB20HF-30HF-IA-en-32 45
6.4.3 Opening the DC Connector
1. Unscrew the screw connection.
2. Unlocking the DC connector: Insert a 3.5 mm
screwdriver into the snap slot on the side and lever
it out.
3. Carefully pull the DC connector apart.
4. Loosen the clamping bracket using a screwdriver.
For this purpose, use a screwdriver with a blade
width of 3.5 mm.
5. Remove the cable.
☑ The cable is removed from the DC connector.