Euro-Pro EP171 - Manual (Page 7)

OPERATING INSTRUCTIONS cont. OPERATING INSTRUCTIONS cont.
DRY IRONING
SETTING THE IRON TEMPERATURE
All marked settings on the temperature dial can be used for dry ironing.
1.
Plug the cord into a polarized, 120V AC electrical outlet. The thermostat light
light will go “On”, indicating that the iron is receiving power.
2. Set Steam Control Knob to no steam setting.
3. Set Temperature Control Dial to desired temperature setting.
4. Place iron on its heel (on a stable, protected surface) while iron is
warming to desired temperature.
5. When the iron has reached the desired temperature, the thermostat
light will go “Off”.
Set the temperature dial according to the type of fabric.
• Synthetics
(low temperature)
• • Silk, Wool
(medium temperature)
• • • Cotton, Linen
(high temperature)
Please note: Before starting to iron delicate fabrics, it is best to first test
the temperature of the iron on a hem or an inside seam.
SPRAY SETTING
1. Set the temperature control dial to the desired temperature.
2. Stand the iron on its heel and connect it to the main power supply.
3. The thermostat light will come on to indicate that the iron is heating
up. The light will go “Off” when the set temperature has been
reached and the iron is ready to use. The thermostat light will go on
and off as the thermostat is switching the heating element on and off
to maintain the selected temperature.
The water spray is useful on fabrics with stubborn wrinkles. Press the spray
button and a jet of water will spray onto the fabric being ironed. The water
spray can be used with dry or steam ironing as desired.
1. Disconnect the iron from the power supply.
2. Follow filling instructions on page 3.
3. Plug the power cord into the electrical outlet.
4. Set Temperature Control Dial to desired temperature setting.
5. Set Spray/Burst of Steam Button to spray position.
6. Press the Spray/Burst of Steam button slowly to get a jet of spray.
4 7