SMA WINDY BOY - Manual (Page 16)

Settings SMA Solar Technology AG
16 WBSetup-BEN100411 User Manual
5.4.2 Entering Coefficients
Enter the values of the coefficients ("Wind_a
0
" to "Wind_a
3
") in the "Parameters" value range. Enter
all coefficients, in order that the power curve can be adjusted optimally.
Once you have entered the coefficients, the power curve is displayed adjusted in the diagram.
The figure below graphs a power curve constructed by coefficients.
5.5 Changing the section of the power curve
You have the possibility of enlarging a certain section of the power curve. Click and drag a frame
from the left top to the right button around the section you want to select.
To restore the view of the whole power curve, click and drag a frame from the right to the left.