SMA WB 3600TL - Manual (Page 18)

Mounting SMA Solar Technology AG
18 WB36TL_50TL-IEN102011 Installation Guide
2. Attach the wall mounting bracket to the wall using
appropriate screws (diameter min. 6 mm) and
washers (outer diameter min. 18 mm).
3. Transport the inverter using the handles on the
sides.
4. Attach the inverter to the wall bracket slightly to the
left of its final position.
The right edge of the rear side of the inverter must
be flush with the right edge of the wall mounting
bracket.
5. Check both sides to ensure that it is correctly in
place.