EverFocus EZ630 - Manual (Page 28)

28
3.3.7.6 GAMMA
This menu allows adjustment of gamma correction for ideal linearity of image brightness and
contrast in the range 0.05 to 1.0.
3.3.7.7 NEG. IMAGE
Allows user to create a negative of the original image. A negative image is a tonal inversion of a
positive image, in which light areas appear dark and vice versa. A negative color image is
additionally color reversed, with red areas appearing cyan, greens appearing magenta and blues
appearing yellow.
3.3.7.8 RETURN
Return: Press “RET” to save all settings in D-EFFECT menu and return to the previous menu.
Press “END” to save all the menu settings and exit.
3.3.7.9 MOTION
This camera enables you to observe movements of objects in 4 different areas on the screen,
and the message “MOTION DETECTED” appears on the screen when movement is detected.
The camera detects an object’s movement by sensing changes in the pixels displayed.
OFF
Disables the MOTION function.
ON
AREA SELECT Please select the area you would like to detect from the 4 areas in AREA
SELECT mode
AREA DISPLAY Select “ON” to use the motion area selected in sensitivity. Select “OFF” to
disable this function.
LEFT/RIGHT Set the coordinate of the horizontal axis 5~66.
WIDTH Set the size of horizontal area 0~93.
TOP/BOTTOM Set the coordinate of the vertical axis 1~60.
HEIGHT Set the size of vertical area 0~60.
SENSITIVITY Set the sensitivity level for the motion trigger by selecting from 0~40. When
the sensitivity value is high, motion detection sensitivity increases to sense
very small movements and vice versa.
MOTION VIEW Select “ON” to display motion detection pixels in the live view.
RETURN Press “RET” to save all settings in MOTION menu and return to the
previous menu. Press “END” to save all the menu settings and exit.
3.3.7.10 PRIVACY
This mode masks areas you do not want to display on the screen or record.
OFF
Disable the PRIVACY function.
ON
AREA SELECT Please select the area you would like to hide from the 8 areas in AREA