Windows media player, Basic operation – Emerson EMP3550-4 User Manual
Page 6
5
6
● To turn on the player, slide and HOLD the [ POWER ] switch to the left
until the display turns on.
● To turn the player off, slide and HOLD the [ POWER ] switch to the left
until the display turns off.
Reset the player
If a malfunction of the player occurs, take a metal pin or use the end of a
paper clip, and press it into the RESET hole to re-initialize the system of
your player.
Lock / unlock buttons
A-B repeat function
Basic Operation
Make sure your battery is charged, and the headphones are properly
connected.
Turning on/off
Windows Media Player
To organize and play your music, rip CD tracks to your hard drive, and
transfer music, picture, and video files to your player, we recommend
using Windows Media Player. If Windows Media Player is not installed
on your computer, you may download the latest version (Windows Media
Player 11) of the player from:
www.microsoft.com/windows/windowsmedia/player/download/
If you are unsure of which version of Windows Media Player is
compatible with your operating system, you may use the link below for
more information regarding previous versions of the Windows Media
Player.
www.microsoft.com/windows/windowsmedia/player/versions.aspx
This feature prevents you from accidentally pressing the buttons while
using the player on the move.
● To lock the player slide the [POWER] switch to the right. Display
show .
● To unlock the player slide the [POWER] switch to the middle
.
While playing music, touch to enter the A-B repeat mode, the
screen displays “A” and se the start point of the repeat section. Touch
again, the screen displays “A-B” and set the end point of the
section. It repeat the section again and again. Touch the third time
to cancel A-B repeat.
RESET hole
[POWER] switch
ON / OFF
Slide the switch this way
and HOLD until the player
turns on or off
□
MIC