Electrolux 76639 - Manual (Page 17)

Operating Instructions
17
Running a washing cycle
Brief instructions
A washing cycle consists of the following steps:
0 1. Set the correct washing program:
– Select the program and temperature with the program selector.
– Select any program options if required.
2. If necessary, change the spin speed/select RINSE HOLD.
3. Set the DELAY TIMER if required.
4. Open the door and load the washing.
5. Close the door.
6. Add the detergent/conditioner.
7. Start the washing program with the START/PAUSE button.
When the washing program has ended:
Important! If the washing cycle ended with a rinse hold, carry out
PUMP OUT, SPIN, or SHORT SPIN before opening the door.
8. Open the door and remove the washing.
9. Switch off the washing machine: Set the programs selector to OFF.
Setting the Washing Program
3 See "Program tables" for a suitable program, correct temperature and
possible program options to suit the type of washing.
0 1. Set the program selector to the
desired washing program with
the desired temperature.
The expected duration of the
program selected is displayed in
the multi display in minutes.