Epson EH-TW5500 - Manual (Page 37)

35
Configuration Menu Functions
Configuration Men
u
If the light from or becomes bothersome while watching a movie or the like in a dark room,
turn this setting to "Off".
Press , , and to specify the position for the menus to be displayed.
Selects the color for the main configuration menu.
• Color 1:Black
• Color 2:Blue
This sets whether the following message displays appear (On) or don't appear (Off).
• Image signal, color mode, aspect and item name when memory settings are retrieved.
• Messages such as when no image signals are being input, when an incompatible signal is input, and
when the internal temperature rises.
Displays a menu for selecting the screen status for when using the blank function or when no image
signal is input.
This sets whether the start-up screen (the image that is projected when projection starts) is displayed (On)
or not displayed (Off).
If you change the setting, the new setting will take effect after the power has been turned off and the cool-
down period is complete.
Sets the signal format in accordance with the video equipment that is connected to the [Video] or [S-
Video] input port. If set to "Auto", the video signal format is set automatically.
If there is a lot of interference in the image, or if a problem such as no image being projected occurs even
though "Auto" has been selected, select the correct signal format manually.
Change this setting depending on the type of signal that is being output from the video equipment that is
connected to the [Component] input port.
If "Auto" is selected, appropriate signal is automatically set. If colors appear unnatural even though
"Auto" is selected, select appropriate signal name in the menu.
This sets the display language for messages and menus.
Adjustment values for the "Settings" menu functions are returned to their default settings, except for the
"High Altitude Mode", "Projection", "Component", and "Language".
Illumination
Display
Menu Position
Menu Color
Messages
Display Background
Startup Screen
Input Signal
Video Signal
Component
Language
Reset
*1 The setting values are stored separately for each image source and signal type.