iSys C to V - Manual (Page 9)

PAGE 9 --- C to V User Guide © iSys-The Imaging Systems Group Inc.
Note 1:
The busy width is dependent on the received busy from the VPI port and the width of the Centronics strobe.
Note 2:
The acknowledge width is dependent on the busy width (c).
VPI Timing
Parameter Minimum Maximum
piclk width (F)
remote width (G)
peripheral busy (H)
300nS
300nS
250nS 300nS
300nS
note 4
Note 3:
Piclks and remote functions will only be asserted if the peripheral is ready (not busy).
Note 4:
Peripheral busy maximum width (H) is peripheral dependent.
6. FIGURES
Figure 1 - Input Connections
a - Power input connector
b - power indicator
c - Centronics. parallel host input
Figure 2 - Output Connection
d - Versatec (VPI) output to peripheral