KACO Powador-piccoLOG - Manual (Page 17)

Installation and Start-up
Operating manual Powador-piccoLOG_EN Page 17
5.8 Powador-web Public Portal
" Scan QR code onto the device using a smartphone and follow the
instructions or:
" visit www.powador.net/registration and complete the registration form.
" Start the portal.
5.9 Powador-piccoLOG Device Manager
software
NOTE
The installation sequence must be followed. Otherwise the device
will not be properly recognised by the system.
• First install the software and the drivers, then connect to the PC.
• Following incorrect installation, install the device on the system
afterwards (see 5.9.3 "PC does not recognise the device").
5.9.1 Install software
" Download software " Powador-piccoLOG Devicemanager " at " www.kaco-
newenergy.de/monitoring/piccolog ".
" Install software.
5.9.2 Connect the device to a PC
↻ Software is installed.
↻ Device is connected to the power supply.
" Connect the device to a PC using a USB cable.
" Device is recognised by PC.
" Start software.