Laney IRT30-112 - Manual (Page 3)

Forged deep within the Black Country - the metal beating industrial heartland of the
UK - where the sound of metal guitar was born, comes the IRONHEART.
With molten metal flowing through its circuits, IRONHEART continues the legacy passed on by previous Laney amps such as
KLIPP and AOR, and hits you hard between the eyes like a power hammer from hell.
When cranked, the IRT30-112 possesses massive amounts of gain, but is
equally at home providing smooth rock and clean tones. Like its 80's metal
predecessor the AOR, each channel features 3-band EQ push/pull pots for
extreme tone shaping and flexibility.
Along with a Watts control, which allows the output of an IRT30-112 to be
screwed right down to less than 1 watt output power, it also features a
foot switchable Pre-Boost function which works just like kicking in a gain
pedal in front of your amp. On the rear panel can be found sockets for the
FX Loop, Loudspeakers, Aux In & Foot switch, along with a switchable DI
which features cabinet emulation in the AMP mode.
The IRT30-112 combo features two independent channel controls, with a
switchable clean mode, for extra versatility. It is loaded with a 12" custom
designed HH Acoustics speaker and t
Combine your IRT30-112 with an IRT112, IRT212 or IRT412 speaker
cabinet for the ultimate tonal experience.
he base of the cabinet is fitted with a
special Tilting Mechanism, allowing the cabinet to be used in the upright or
tilted back positions.