Laney LX12 User Manual
Page 11
Page 10 /12
OPERATING INSTRUCTIONS
SPECIFICATIONS
Supply Voltage
~100V, ~120V, ~220V, ~230V, ~240V 50/60Hz Factory Option
Mains Fuse
Not user changeable
Power Consumption
20W
Output Power Rating
12W
Loudspeaker
6” Custom Designed Driver
Features
Rugged construction
TEC Tube Emulating Technology
Headphone socket
CD In (10K Input impedance)
(Nominal 300mV Input level)
EQ
Passive Bass, Middle and Treble
Input Impedance
220 KOhm/150pF
Size
314*289*176
(H*W*D)
Unit Weight
4.2 Kg
Packing Weight
5.2 Kg
This product conforms to:
European EMC directive(2004/108/EC), Low Voltage Directive (72/23/EEC) and CE mark Directive (93/68/EEC)
Page 11 /12
OPERATING INSTRUCTIONS
General Notes
Amplifier connection: In order to avoid damage, it is advisable to establish and follow a pattern for turning on and off your
equipment. With all system parts connected, turn on source equipment, tape decks, cd players, mixers, effects processors etc.
BEFORE turning on your guitar amplifier. Many products have large transient surges at turn on and off which can cause damage to
your speakers. By turning on your guitar amplifier LAST and making sure its Volume control is set to minimum any transients from
other equipment will not reach your loudspeakers. Wait until all system parts have stabilised; usually a couple of seconds. Similarly
when turning off your system always turn down the Volume control on your guitar amplifier and then turn off its power before
turning off other equipment.
Cables: Never use shielded or microphone cable for any speaker connections as this will not be substantial enough to handle the
amplifier load and could cause damage to your amplifier system.
Caution: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with
placement and operation to avoid exposure to excessive levels that can cause permanent hearing damage. (Refer to guidelines on
page 2)
Servicing: The user should not attempt to service these products. Refer all servicing to qualified service personnel.
QUICK START SETTINGS - continued
EXTREME/METAL SETTINGS