Laney AH110 - Manual (Page 9)

8
Media Player Controls
MEDIA PLAYER
MODE
HOLD ON USB/SD/BT/ OFF
TM
1
2
3
4 5 6 7 8
d
a b c
MEDIA PLAYER:
Use the onboard player for playing back MP3/ WMA encoded audio tracks from SD card/USB or
Bluetooth® device.
1. SD CARD SLOT: Insert your standard SD card here.
(Automatically detected on insertion, or if removed & reinserted uses smart technology
to resume play from the previous point).
2. DISPLAY SCREEN: Display track information.
a. Pause or Play indicator
b. What device is being used: USB or SD Card
c. Time into track
d. “blue” is displayed when using a Bluethooth Device
®
3. MEMORY STICK SLOT: Connect your USB memory stick here.
(Automatically detected on insertion, or if removed & reinserted uses smart technology
to resume play from the previous point).
NOTE. The USB socket is for the playback of recorded tracks only, not for
charging a USB device.
4. MODE: Select the input source - SD card USB or Bluetooth and turn OFF the player. ®
5. PLAY/PAUSE: Use this control to play or pause your MP3 music/backing track.
6. LOOP: Use this to enable/disable the looped playback modes.
When using this button with an SD card or USB Stick, there are 2 options:
ALL - Plays all the tracks on the root of the device in date order, then the sub folders
ONE - Plays one track repeatedly (cycle to the required track to play using NEXT button (8).
7. PREVIOUS: Press to skip to the preceding track.
8. NEXT: Press to skip to the next track.
a. CONNECT TO BLUETOOTH DEVICE: Toggle through the system modes and select Bluetooth (using MODE switch (4)). ® ®
b. On your Bluetooth capable device, make sure bluetooth is enabled. Scan down the list of available devices - search for: Laney Audiohub and select. ® ®
c. Your AudioHub is now connected to your bluetooth device & controlled using the PLAY/PAUSE, PREVIOUS & NEXT BUTTONS
d. Switching between a USB device and a Bluetooth device is possible, but the Bluetooth device will need to be reselected by pressing the MODE
® ®
button once.
Only one Audiohub can be paired to your Bluetooth capable device at once, so remember to de-select & forget a device if you plan to use a different ®
Audiohub device next time.