Laney AH-FREESTYLE - Manual (Page 8)

FX
1
2
FEEDBACK
TIME
LEVEL
PHONES/
LINE OUT AUX IN
LINE/INST
MIC/LINE
LEVEL LEVEL LEVEL
BASS
TREBLE
VOLUME
LINE
( ) R
( ) L
MIN MAX MIN MAX (HI-Z) MIN MAX
FX FX
MIN MAX MIN MAX
POWER
FRONT & REAR PANEL CONTROLS
1. CH1 MIC/ INPUT: Combi Socket providing either a Balanced XLR input for low impedance microphone signals
(200-600 Ohms), or an Unbalanced Jack input socket for connection of all line level signals (keyboard, signal processor, sample,
drum machine, etc.).
2. CH1 LEVEL: Adjusts the channel level, enabling the user to balance levels across channels.
3. FX SEND: When pushed in, this switch routes the channel signal to the built in digital delay.
4. CH2 STEREO LINE INPUT: 2 x Unbalanced Jack sockets for connection of a stereo line signal. Sockets may also be
used to connect a single mono source, or two individual sources. When connecting independent sources, use the output
controls on your device to adjust the balance between the two signals. Active instruments may also be connected here.
5. & 6. CH2 LEVEL & FX: See CH 1 LEVEL & FX.
7. CH3 LINE/INSTRUMENT INPUT: Unbalanced high impedance input for connection of high impedance devices such
as electric guitars/basses, or regular line devices. This channel features +6dB gain compared to the other line inputs, so take
care if connecting a line level device here.
8. & 9. CH3 LEVEL & FX: See CH1 LEVEL & FX. As this channel has more gain than the other line inputs, don’t be
surprised if you find that you need to set this control lower than the others when using line level devices.
10. DELAY TIME Controls the amount of time between repeats of the inbuilt delay. Turning this control clockwise will
increase the delay time.
11. DELAY FEEDBACK This controls the amount of repeats in the inbuilt delay. Turning the control clockwise increases the
amount of repeats.
LINE
9
10
8