Lanner LVC-5570 - Manual (Page 3)

3
About
About
Embedded and Industrial Computing
Mechanical compliance
Vibration:
General Vibration (operating): Refer to MIL-STD-810G, •
Method 514.6, Procedure I (Transportation), Category
4 – Common carrier (US highway truck vibration
exposure)
General Vibration (non-operating): Refer to MIL-STD-
•
810G, Method 514.6, Procedure I (Transportation),
Category 24 – General minimal integrity
Shock:
Operating (Functional Test for Ground Equipment): •
Refer to MIL-STD-810G, Method 516.6, Procedure I,
40g, 11ms
B. Non-Operating (Crash Hazard Shock Test for Ground
•
Equipment): Refer to MIL-STD-810G, Method 516.6,
Procedure V, 75g, 11ms
Electrical transient conduction along supply lines only
(12V/24V)
Revision History
Revision Revision Date Changes
1.1 20130806 DVI-D, maximum
resolution changes
from 75 to 60Hz
VGA, maximum reso-
lution changes from
60 to 75Hz
1.2 20130924 Change HDDSL1
jumper settings
1.3 20140701 Change the default
BIOS values for DIO