Lanner AV-ICE02 - Manual (Page 13)

Software User Manual Version 1.0.1
10
Chapter 3. Building and Installing the Software
3.1 Unpacking the Software
The software package comes in the form of a tarball. The instructions in this document
assume that you have super user privileges.
#su <enter password for root>
1. Create a working directory for the software. This directory can be user defined,
but for the purposes of this document, a recommendation is provided.
#mkdir /QAT
#cd /QAT
2. Transfer the tarball to the development board using any preferred method, for
example USB memory stick, CDROM, etc. Unpack the tarball using the following
command:
#tar –zxof <tarball name>
The installation script and accelerations software tarball will be created under the QAT
directory.