Lanner MR-350 - Manual (Page 5)

3
Introduction
Chapter 1
Network Application Platforms
Front Panel Features
F1 LED Indicators for 4 LANs
The LAN5/LAN4/LAN3/LAN2/LAN1 LED indicates the connection between the port and the next piece of network
equipment.
LED Behavior Interpretation
LINK/ACT (Yellow) On/Flashing The port is linking.
Off The port is not linking.
SPEED (Green/Amber) Amber The connection speed is 1000Mbps.
Green The connection speed is 100Mbps.
Off The connection speed is 10Mbps.
F2 Power/Status/HDD LED
Power LED (Green):
Green indicates that the system is powered on.
Status LED (Green/amber):
This LED is programmable. You could program it to display the operating status with the behavior like the following:
If the LED is green, it indicates that the system’s operating state is normal. If it is amber, it indicates that the system is
malfunctioning.
F2 F1