Bang & Olufsen BeoVision 11 with Beo4 Getting Started - Manual (Page 23)

In
st
al
la
tio
n a
nd s
et
tin
g u
p
Maintenance
Screen
Cabinet and controls
Never alcohol
Regular maintenance, such as cleaning, is the responsibility of the user.
Use a mild window cleaning fluid and lightly clean the screen without leaving streaks or traces. Some micro-fibre cloths
may harm the optical coating due to their strong abrasive effect.
Wipe dust off the surfaces using a dry, soft cloth. To remove stains or dirt, use a soft, damp cloth and a solution of water
and mild detergent, such as washing-up liquid.
Never use alcohol or other solvents to clean any parts of the TV.
Cleaning
Gather the cables from each side, make the
bundles cross each other, and fasten them to
either side or in the middle, depending on wall
bracket or stand placement.
If you have a motorised stand or wall bracket,
make sure that there is enough slack in the
cables to allow the TV to turn to either side
before you fasten the cables with cable ties to
make a neat bundle.
Locate the connection panel and other important
items:
When the TV is placed on a wall bracket or stand
you can attach the speaker cover.
Hold the speaker cover with both hands and place
the pins into the holes at the bottom first. Then
carefully place the pins into the holes at the top
and push down. During cleaning it is recommended to remove the
speaker cover. Avoid spraying liquid directly on
the screen as this may damage the speakers, use a
soft cloth instead.
Carefully remove the speaker cover by supporting
it in the side and at the bottom.
1 Mounting bracket for wall bracket.
2 Mounting bracket for stand.
3 Covers for the main connection panel. Pull out
at the bottom to remove the cover parts.
4 Socket for temporary connections. Press in the
middle to open.
Depending on your setup, lead the cables through
the hole in the middle or either sides of the
connection panel cover.
Run cables
Overview
Fasten the speaker cover
3 3 3
4
3 3
23