Bang & Olufsen BeoVision 11 with Beo4 User Guide (No tuner) - Manual (Page 33)

33
Normally you configure the source when
connected as explained
on page 12 but
you can also download a PUC table later
on.
If the PUC table you are searching for is
not in the list, or if you need more
information about PUC tables in general,
contact your Bang & Olufsen retailer.
You can also delete PUC tables, however,
you must first unconfigure the connected
product belonging to a PUC table.
See page
13 .
Depending on your IR-controlled PUC equip-
ment, you may have to press SHIFT + 9 on
your Beo4, to switch on the equipment.
SHIFT can be found in the Beo4 LIST.
Peripheral Unit Controller tables
With an Internet connection you
can download Peripheral Unit
Controller (PUC) tables enabling
you to operate connected
equipment, such as a set-top
box, with the Beo4/Beo6 remote
control.
PUC tables are available for
many other brand products, such
as television screens, projectors,
DVD players, set-top boxes, and
game consoles. The list of PUC
tables on the Internet is updated
and expanded on a regular basis.
Download or remove PUC tables
MENU
SETUP
SERVICE
PUC MANAGEMENT
PUC DOWNLOAD
PUC CLEAN-UP