Elektra Beckum PK 255 3 - Manual (Page 6)

2.4
PK 255
Symbols shown on the machine
A
Danger!
Disregard of the following warnings can lead
to severe personal injury or material damage.
Read instructions.
Do not reach into the revolving saw blade.
f
Wear hearing protection.
Use push stick if distance
between saw blade and rip fence
is
£ 120 mm.
Cut round stock only with a suita-
ble holding device.
Use table extension, if otherwise
workpiece would fall off the table
after cutting.
Max. saw blade Ø 250 mm
Saw blade arbor bore Ø 30 mm
Max. blade speed 4000 min
-1
Max. depth of cut 80 mm
Safety devices
Riving knife
The riving knife prevents the workpiece from being
caught by the rising teeth of the saw blade and
being thrown against the operator.
Always have riving knife installed during operation.
Blade guard
The blade guard protects against accidental contact
with the blade and keeps chips from flying about.
Always have blade guard installed during operation.
Push stick
The push stick serves as an extension of the right
hand and protects against accidental contact with
the saw blade.
Always use push stick if distance between
rip fence and saw blade is
£
120 mm.
In order for the push stick to be always at hand, it
can be stored in a sheath in the machine's housing.