Bang & Olufsen BeoSystem 4 with Beo4 User Guide - Manual (Page 32)

32
See two sources at the same time
Your Beo4/Beo6 remote control
gives you access to a dual-screen
function for viewing a television
source and a WebMedia or
HomeMedia source at the same
time. You can also bring up an
HDMI source (for example a set-
top box or Blu-ray player) and a
WebMedia or HomeMedia
source at the same time.
There are some limitations when using
the Picture-and-Picture (P-AND-P)
function since some source combinations
may not be possible. For example, you
cannot watch two HDMI sources at the
same time. When an invalid combination
is selected, an on-screen message
appears on the television screen.
If you watch 3D and switch on the
P-AND-P function, the television will
switch to 2D.
To view a source registered in the
SOURCE LIST SETUP menu as V.AUX,
such as a set-top box, press LIST and use
the navigation button up or down until
P-V.AUX is shown in the Beo4 display.
Volume adjustment always affects picture A,
while other operations, such as selecting
channels, affect picture B. Selecting a new
source cancels P-AND-P viewing.
While watching, for example,
television …
Beo4 operation …
Press to bring up P-AND-P
Press, for example, DVD to
select the source to view on the
right side of the screen (B)
Press to swap the left picture
and right picture
Press to bring up P-AND-P to
switch between small and large
for the left and right picture
Beo6 operation …
Press to bring up the P-and-P
display
Press, for example, DVD to
select the source to view on the
right side of the screen (B)
Press to swap the left picture
and right picture
Press to switch between small
and large for the left and right
picture
To leave the P-AND-P
function …
Press to leave the function and
return to normal viewing of the
source on the left side of the
screen (A) or simply select a
source
A B
A B
LIST
P-AND-P
DVD
MENU
0
LIST
P-AND-P
BACK
P-and-P
DVD
Swap
Size