Emerson Radio AV101 - Manual (Page 18)

17
Ÿ VCR Connection-Audio (Connection Cables Not
Included):
To listen to the sound from your stereo VCR through
the speakers of this system, connect the Left/Right
audio output jacks of your stereo VCR to the Left/Right
audio input jacks (VIDEO (AUDIO) INPUT) of this
system.
Ÿ External Decoder Connection-Not Required:
This DVD player has its own built in Dolby Digital
and DTS decoders that provide digital 5.1 channel
Surround Sound audio from DVD movies encoded with
Dolby Digital and/or DTS soundtracks. No external
decoders are required. However we have also included
Coaxial Digital Audio output jack which allows digital
audio signals to be fed to an external Dolby Digital or
DTS decoder if desired. The Coaxial digital audio
connection cable is not included.
Ÿ Basic Connection Diagram:
The diagram below represents a typical connection.
In this diagram you can view the picture from DVD
movie discs on your TV set. You can also play the
sound from your stereo TV set and the sound from
your stereo VCR through the speakers of this system.
Connecting the AC Power Cord
Notes:
Ÿ The Power Requirement is: AC 120V, 60Hz.
Ÿ Connecting to power other than the one listed above
may damage the system or cause abnormal
operation.
Ÿ Before connecting the AC power cord of this system
to a wall outlet, connect the speakers and other
component cables to the system.
Ÿ Connect the AC power cords of your TV and any
optional connect to a wall outlet.
TV and Optional Component
Connections
Required cords
Ÿ Video cord for connecting a TV set (included).
Ÿ Audio cords (not included).
When connecting a cord, be sure to match the
color-coded pins to the appropriate jacks on the
components.
Notes:
Ÿ TV Connection-Normal (Connection Cable Included):
To view the video from DVD discs on your TV set
connect the Video Out jack of this system to the Video
ln jack of your TV set. The Video jacks are usually
colored yellow. Use the included video cable with
yellow plugs on each end.
Ÿ TV Connection- S-Video (Cable Not Included):
If you TV set has an S-Video Input Jack you can
connect your TV to the S-Video Out Jack on the back of
this system. (The S-Video connection cable is not
included) the S-Video connection will provide the best
picture quality if your TV is equipped to handle S-Video
signals. We recommend using the S-Video
connection if your TV has an S-Video input jack.
Ÿ TV Connection-Audio (Connection Cables Not
Included):
If your Stereo TV has Left/Right audio output jacks
you can listen to the sound of your TV set through the
speakers of this system. Connect the Left/Right
audio output jacks of your TV set to the Left/Right
audio input jacks (TV/AUX INPUT or VIDEO (AUDIO)
INPUT) of this system.