LinPlug Organ 3 - Manual (Page 24)

Off: switches the ECS learn- & clear-mode off.
Learn: activates the ECS-learn mode. Don’t forget to switch “Learn”
off after assigning combinations!
Clear: clear parameter-controller combinations of Organ 3
parameters. Simply select “clear” and change the parameter
you want to get rid of the according MIDI-controller. Don’t
forget to switch “Clear” off after erasing combinations!
Clear all: clear all parameter-controller combinations of Organ 3.
Load: load parameter-controller combinations.
Save: save parameter-controller combinations.
See Appendix B for a list of all predefined ECS assignments. The
predefined assignments can be replaced with the assignments of your
choice by the procedure we described in this chapter.
The „Effects“ page
The „Effects“ page is located on the right side of Organ 3’s user
interface. You open it by clicking the “Effects”-tab. In the “Effects” Menu
are the controls of the dual-effects processor.
First, the output of the drawbars is sent to Fx 1 and then passes Fx 2.
You can turn Fx 1 and Fx 2 on and off, using the buttons to the right of
the effect type-selections.
The following effects types are available: Rotary, Reverb, Delay, Chorus,
Gator and Crusher.
LinPlug Organ 3 User Guide Page 24