LinPlug Spectral - Manual (Page 27)

Spectral Editor
The Oscillator Waveform consisting of 256 Harmonics and the detailed 121
band Filter of Spectral require a dedicated editor which supports sound
design and turns it into a pleasureful experience.
The keys are powerful manipulation functions and clever visual
presentation of the edited data. Both editors for Oscillators and Filters
share a lot of features, so we describe them only once and note if
something only applies to a certain editor. The editors are opened and
closed by clicking on the oscillator waveform display or the filter shape
display.
The Editor consist of the large upper display and editing part and the
smaller lower control part. The display part shows a couple of numbers
written on top, indicating the shown range of harmonics or filter bands. In
both editors each octave is shown in a slightly different color.
It shows a number of either harmonics or filter bands depending on its
zoom factor. You can change the harmonics and filter bands by clicking
and dragging them to adjust the levels.
Note: In the Oscillators Waveform Editor you can also edit the phase of
each harmonics by holding down the Control-Key while editing.