Linx Technologies LICAL-TRC-MT - Manual (Page 4)

– – – – 2 3
MT Series Transcoder Specifications
Parameter Symbol Min. Typ. Max. Units Notes
Power Supply
Operating Voltage V
CC
2.0 5.5 VDC
Supply Current l
CC
At 2.0V V
CC
340 450 µA 1
At 3.0V V
CC
500 700 µA 1
At 5.0V V
CC
800 1,200 µA 1
Power Down Current l
PDN
At 2.0V V
CC
0.15 1.2 µA
At 3.0V V
CC
0.20 1.5 µA
At 5.0V V
CC
0.35 1.8 µA
Transcoder Section
Input Low V
IL
0.0 0.2 x V
CC
V 2
Input High V
IH
0.8 x V
CC
V
CC
V 3
Output Low V
OL
0.6 V
Output High V
OH
V
CC
– 0.7 V
Input Sink Current 25 mA
Output Drive Current 25 mA
Environmental
Operating Temperature Range –40 +85 °C
1. Current consumption with no active loads.
2. For 3V supply, (0.2 x 3.0) = 0.6V max.
3. For 3V supply, (0.8 x 3.0) = 2.4V min.
Electrical Specifications Ordering Information
Ordering Information
Part Number Description
LICAL-TRC-MT MT Transcoder
MDEV-LICAL-MT MT Master Development System
MT transcoders are shipped in reels of 1,600
Absolute Maximum Ratings
Figure 2: Ordering Information
Figure 3: Absolute Maximum Ratings
Absolute Maximum Ratings
Supply Voltage V
CC
−0.3 to +6.5 VDC
Any Input or Output Pin −0.3 to V
CC
+ 0.3 VDC
Max. Current Sourced by Output Pins 25 mA
Max. Current Sunk by Input Pins 25 mA
Max. Current Into V
CC
250 mA
Max. Current Out Of GND 300 mA
Operating Temperature −40 to +85 ºC
Storage Temperature −65 to +150 ºC
Exceeding any of the limits of this section may lead to permanent damage to the device.
Furthermore, extended operation at these maximum ratings may reduce the life of this
device.
Warning: This product incorporates numerous static-sensitive
components. Always wear an ESD wrist strap and observe proper ESD
handling procedures when working with this device. Failure to observe
this precaution may result in module damage or failure.
Figure 4: Electrical Specifications