Linx Technologies EVM-868-EUR - Manual (Page 4)

Warning: Linx radio frequency (“RF”) products may be
used to control machinery or devices remotely, including machinery
or devices that can cause death, bodily injuries, and/or property
damage if improperly or inadvertently triggered, particularly in industrial
settings or other applications implicating life-safety concerns. No Linx
Technologies product is intended for use in any application without
redundancies where the safety of life or property is at risk.
The customers and users of devices and machinery controlled with
RF products must understand and must use all appropriate safety
procedures in connection with the devices, including without limitation,
using appropriate safety procedures to prevent inadvertent triggering
by the user of the device and using appropriate security codes to
prevent triggering of the remote controlled machine or device by users
of other remote controllers.
Do not use this or any Linx product to trigger an action directly
from the data line or RSSI lines without a protocol or encoder/
decoder to validate the data. Without validation, any signal from
another unrelated transmitter in the environment received by the
module could inadvertently trigger the action. This module does not
have data validation built in.
All RF products are susceptible to RF interference that can
prevent communication. RF products without frequency agility or
hopping implemented are more subject to interference. This module
does not have frequency agility built in, but the developer can
implement frequency agility with a microcontroller and the example
code in Linx Reference Guide RG-00101.
Do not use any Linx product over the limits in this data guide.
Excessive voltage or extended operation at the maximum voltage
could cause product failure. Exceeding the reflow temperature profile
could cause product failure which is not immediately evident.
Do not make any physical or electrical modifications to any
Linx product. This will void the warranty and regulatory and UL
certifications and may cause product failure which is not immediately
evident.
!