Epson POWERLITE HOME 10+ CPD-1790-4R2 User Manual
Page 19
![background image](/manuals/80372/19/background.png)
19
1. Press the
Menu
button. You see the menu screen.
2. Press the
Select
button to select the Image menu. Then press the
Select
button again to
select
Picture
Quality
.
3. Use the arrow buttons on the remote control or the
,
, or
buttons on the
projector to set the following options:
■ Brightness
Adjusts the brightness of the picture. Increase (+) the setting to make the picture
brighter, or decrease (-) the setting to reduce brightness.
■ Contrast
Adjusts the contrast between colors or shades in the picture.
■ Sharpness
Adjusts the sharpness of the picture.
■ Saturation
(video only)
Adjusts the color depth of the picture.
■ Tint
(component or NTSC video only)
Adjusts the tint or hue of colors in the picture.
■ Color Temperature
Adjusts red or blue tones. A lower color temperature produces a picture with more
red, while a higher color temperature produces more blue and sharper color tones.
■ Flesh Tone
Adjusts the balance of green to magenta in the image.
■ Tracking
(computer images only)
Removes unwanted vertical lines from a computer image by matching the projector’s
internal clock to the computer display signal.
■ Sync
(computer images only)
Corrects fuzziness by synchronizing the projector with the tracking signal sent from
the computer.
4. Select the
Color Mode
option and choose from these settings:
■ Dynamic
For projecting in bright rooms; images will have greater color intensity.
■ Living Room
For projecting in rooms with a lot of ambient light; images retain their natural color.