Escient M32002-01A2 - Manual (Page 4)

SE-D1 START UP GUIDE PAGE 2
2)Follow these steps to connect your Sony CD/DVD changers to
your FireBall:
1. Connect one end of the included RS-232 serial cable into Communication
Port labeled “Changer”, on the back of your FireBall.
2. Connect the other end of the RS-232 serial cable into the “RS-232C” port on
the back of your Sony changer.
3. Locate the Analog Audio (red/white) / Composite Video (yellow) cable that
came with your changer.
4. Connect one end of the Analog Audio (red/white) cable into the Analog Audio
(red/white) In jacks on the back of your FireBall
5. Connect the other end of the Analog Audio (red/white) cable into the Analog
Line Out jacks on the back of your changer.
6. Connect one end of the Composite Video (yellow) into the Composite Video
(yellow) In jacks on the back of your FireBall
7. Connect the other end of the Composite Video (yellow) cable into the Video
Line Out jacks on the back of your changer.
• For the best audio quality, you should also connect a digital optical cable (not included)
between your changer and FireBall.
• For the best video quality, you should also connnect component video cables (not included)
between your changer and FireBall.
Note: The RS-232 serial control cable between the FireBall and the changer must be 25 feet or less
in length.