Euro-Pro STEAM STATION EP7005 - Manual (Page 15)

Cleaning
• Before cleaning, remove the power cord (11) from the wall outlet and allow the iron to
cool down sufficiently.
• Scale and other deposits can be wiped off the soleplate with a damp cloth and some
non-scratching (fluid) abrasive.
• Keep the soleplate smooth: avoid hard contact with metal objects.
• From time to time clean the inside of the water tank (8A) by filling it with water and
shaking.
Storage
• Remove the power cord (11) from the wall outlet.
• Pour any remaining water out of the water tank (8A).
• Set the steam control (2) to position “0” (= no steam).
• Put the iron on the rubber mat (10) on its stand (8) and let cool down sufficiently before
you store it.
• Regularly check if the power cord (11) is still in a good and safe condition.
How to Replace the “Anti-Calc” Cassette
• For your convenience 2 extra “Anti-Calc” cassettes (16) have been included with your
Steam Station.
• The “Anti-Calc” cassette (16) should be replaced after 9-12 months of usage depending on
the amount of usage and water hardness.
• Rotate and release the head of the cassette (16), then take it out.
• Empty the water from the water tank (8A) and cassette housing.
• Fill the water tank (8A) with water.
• Insert the new cassette and lock it into the water filling hole (9).
• Push steam trigger (3) for about one minute. The new cassette is now filled with water.
• You can resume ironing.
To order additional “Anti-Calc” cassettes or for customer service:
Call Customer Service
Tel.: 800-798-7398
Monday to Friday 8:30 AM – 5:00 PM Eastern Standard Time
12