Parkside PDEXS 150 A1 - Manual (Page 30)

30 GB/MT
Introduction
Air Sander PDEXS 150 A1
Introduction
Please make sure you familiarise your-
self fully with the way the air sander
works before you use it for the first time
and that you understand how to handle air sanders
correctly. To help you do this, please read the
accompanying operating instructions. Keep these
instructions in a safe place. If you pass the air sander
on to anyone else, please ensure that you also pass
on all the documentation.
Proper use
The air sander is suitable for sanding, polishing
and preparation of various surfaces. Any other use
or modification to the device shall be considered as
improper use and could give rise to considerable
risk of accident. We will not accept liability for loss
or damage arising from improper use. The device is
intended for private domestic use only.
Features and equipment
1 Trigger / operator’s lever
2 Connection for dust extraction
3 Plug nipple ¼”
4 Compressed air connection (for plug nipple ¼”)
5 Speed control
6 Backing plate with hook and loop fastener,
7 Collar
8 Housing
9 Exhaust air hose
10 Dust bag
11 Open-ended spanner (22 mm) for replacing
the backing plate
Included items
1 Air Sander PDEXS 150 A1
1 Exhaust air hose
1 Plug nipple ¼”
1 Dust bag
1 Open-ended spanner (22 mm)
1 Operating instructions
Technical data
Max. working pressure: 6.3 bar
Air requirement:
approx. 330 l / min
Sanding disc ø: 150 mm
The following pictograms are used in these operating instructions / on the device:
Read instruction manual! No smoking!
Observe caution and safety notes!
Wear hearing protection, dust protection
mask, protective glasses and protective
gloves.
Caution – electric shock!
Danger to life!
Keep children away from the device!
Risk of explosion!
Dispose packaging and appliance in
an environmentally-friendly way!
Risk of fire!
64578_par_Druckluft-Exzenterschleifer_content_LB5.indd 30 27.06.11 16:21