E-Tech STYLUS Pro WT7900 - Manual (Page 12)

12
12 | Introduction
Important Safety Instructions
Before using your printer, read the following safety instructions to make sure
you use the equipment safely and effectively.
• The Epson Stylus Pro WT7900 weighs approximately 220 lb (100 kg).
When lifting it onto the stand, make sure you have four people holding
the printer (see page 21).
• When setting up the printer, make sure you have enough space around
it (see page 17). Leave enough space in front so you can attach the film
basket.
• Place the printer on a flat, stable floor. The printer will not operate
properly if it is tilted or at an angle.
• Avoid places subject to rapid changes in temperature and humidity. Also
keep the printer away from direct sunlight, strong light, or heat sources.
• Avoid places subject to shocks and vibrations.
• Keep the printer away from dusty areas.
• Keep your entire computer system away from potential sources of
electromagnetic interference, such as loudspeakers or the base units of
cordless telephones.
• Place the printer near a wall outlet where the plug can be easily
unplugged.
• Use only the type of power source indicated on the label.
• Connect the printer to a properly grounded outlet. Avoid using an
outlet on the same circuit as a photocopier or air control system that
regularly switches on and off.
• Avoid using electrical outlets controlled by wall switches or timers.
• Use only the power cord that comes with the printer. Use of another
cord may result in fire or electric shock.
• The printer’s power cord is designed for use with the printer only. Using
it with other equipment may result in fire or electric shock.
• Do not use a damaged or frayed power cord.