Emprex GPS Bluetooth Receiver IGO-08A - Manual (Page 11)

7
Operation
1. How to use battery
1-1 Charging battery more than 8 hours
Before first time using IGO-08A’s battery, user has to
charge the battery more than 8 hours. Connect travel
charger or car charger with this device DC5V charge
socket. The Power LED（Red）lighten indicates charging,
the red LED goes off indicates finish charging.
1-2. Battery capacity check
Press the Power Switch for 1 second when the IGO-08A is
power on; the circle LED shows battery capacity. Each
LED equals 12.5% power. Eight LED lighten shows full
battery. We strongly recommend user to charge while
under three LEDs.
2. Turn on IGO-08A and wait for Bluetooth device’
connection.
LED will show below status:
Bluetooth LED（Blue）will blink quickly if it is used first
time or link switch have been activated by users.
（
waiting for pairing or connecting with other Bluetooth
device）
Bluetooth LED（Blue）will blink slowly if it is connecting
successfully.
The GPS LED（Green）will blink slowly two second later