Curtis RCD869 - Manual (Page 16)

Care and Maintenance
Compact Disc Care
CD Handling
When handling CDs:
•
Do not touch the recorded surface.
• Do not stick paper, or write, on either
side of the CD.
• Do not bend the CD.
CD Storage
• To avoid scratches/damage, always
put CDs back in their cases, after use.
• Do not expose CDs to direct sunlight,
high temperature/humidity, for long
periods.
Cleaning CDs
When cleaning CDs:
•
Use a soft cloth, to wipe fingerprints
and dust from the disc surface.
• Wipe in a straight line from the centre to
the outside of the disc. Small dust
particles and light stains, will not affect
playback.
• Never use benzene, thinners, record
cleaner fluid, or antistatic spray to
clean CDs.
Care of the CD Micro system
Cleaning
• Always unplug the product before you
clean it.
• Do not use liquid or aerosol cleaners.
• Clean your product with a soft, damp
(not wet) cloth.
Ventilation
• Do not block or cover ventilation slots.
Blocking of ventilation slots, may lead to
overheating of the product.
Fault Finding
Product will not operate.
• Ensure product is connected to the
mains supply and switched ON.
• Ensure the STANDBY button has been
pressed.
No sound
• Ensure speakers are properly
connected.
• Adjust volume level.
• Check, headphones are not plugged in.
Poor radio reception
• Ensure aerial is positioned to receive
best signal.
• Adjust tuning to improve reception.
• Possible interference from electrical
equipment (e.g. Television). Reposition
product, to reduce interference.
No sound/poor sound quality from CD
player
• Ensure CD is correctly loaded, label
side up.
• Ensure CD is free from dust, dirt or
scratches. CD may require
replacement.
• Condensation on optic lens. Wait 30
minutes, then retry operation.
• CD skipping. Ensure CD is free from
dust, dirt or scratches, clean CD.
Ensure product is not subject to
vibration.
14