Epson All-In-One Stylus Photo RX600 - Manual (Page 85)

Printing Your Selected Photos 85
Printing Your Selected Photos
Once you’ve selected your photos, follow these steps to start printing:
1. Press the u and d buttons to highlight Paper Type , then press the l and r
buttons to choose the type of paper that is loaded in the printer. (If you’re not
sure about the paper type, see the table on page 87.)
Note:
It’s important to select the correct Paper Type setting for the paper you’re using, or
the print quality may not be what you expect.
2. Press the u and d buttons to highlight Paper Size , then use the l and r
buttons to select the size of paper you’ve loaded.
3. Use the u and d buttons to highlight Layout , then use the l and r buttons
to select one of the following:
BorderFree : one photo per sheet, borderless; fits the photo lengthwise
With Border : one photo per sheet, with borders around the edges
Upper 1/2 : one photo on the top half of the sheet
2-up : two photos per sheet
4-up : four photos per sheet
8-up : eight photos per sheet
20-up : 20 photos per sheet; the photo number and date are also printed
Greeting Card : one photo per sheet, for the front of the greeting card
4. Use the u and d buttons to highlight Resolution , then use
the l and r buttons to choose Normal , Photo , or Best Photo .
5. If you like, you can make further changes before printing. Use the u and d
buttons to choose the options listed below, then use the l and r buttons to
make changes to the settings:
■ Filter : Choose Sepia to print your photos with a sepia (brown) tone.
■ Auto Correct: P.I.M. and Exif use your camera’s PRINT Image
Matching or Exif Print settings (these options are automatically selected
when your pictures contain P.I.M. or Exif data).
PhotoEnhance adjusts
the brightness, contrast, and saturation of your photos.
SP RX600 Users Guide.book Page 85 Thursday, January 29, 2004 1:08 PM