Euro-Pro BAGLESS SHARK EP78 - Manual (Page 3)

Using the Cleaning Tools
Assembling Your Vacuum Cleaner
1. Crevice Tool
For radiators, crevices, corners,
baseboards and between cushions.
NOTE: Always remove the power plug from the wall outlet before
assembling or removing accessories.
1. Attaching the Flexible Hose into the Vacuum
Connect the flexible hose into the air intake
duct. Push in until you hear a “click”, indicating
it is in its position.
To remove the flexible hose, reverse the
operation.
2. Fitting the Chrome Telescopic Tube to the
Curved Wand / Hose Extension
Push the chrome telescopic tube into the
curved wand / hose extension, as shown in the
illustration.
Fig. 1 Fig. 2
Slide Slide
For high pile carpet For low nap carpet
• Turn off the vacuum and unplug from wall outlet.
• Attach the Deluxe Air Driven Turbo Brush to the telescopic tube.
• Re-plug the vacuum into the wall outlet and start the vacuum. Beater bar on
the Air Driven Turbo Brush will begin to rotate and will continue to operate
as long as the vacuum is “ON”.
• The Air Driven Turbo Brush is adjustable for carpet nap. To adjust for high
pile carpet, move the slide control on top of the brush housing as shown in
Fig. 1.
• For low nap adjust the slide control as shown in fig. 2.
2. Dusting Brush
The dusting brush is used for the
furniture, venetian blinds, books, lamp
shades and shelves.
Deluxe Air Driven Turbo Brush
The Deluxe Air Driven Turbo Brush is a deluxe floor attachment with a rotating
brush turned by the air flow of the vacuum cleaner. The Turbo Brush is used
for cleaning high pile carpets or whenever agitation of the carpet fibers is
required. The Turbo Brush should NOT be used on hard floors.
Using the Deluxe Air Driven Turbo Brush
3. Extending the Chrome Telescopic Tube
Push forward the plastic knob and pull the
smaller tube outward.
Plastic Knob
Fitting the Floor Brush to the Telescopic Tube
Push the telescopic tube into the Floor brush,
as shown in the illustration.
WARNING: The beater brush of this floor attachment rotates very fast.
To avoid injury,
DO NOT TOUCH the beater brush with fingers while the
brush is rotating.
5
4